A performance analysis of the PASLIB version 2.1X SEND and RECV routines on the finite element machine

The Finite Element Machine is an experimental array processor designed to support research in parallel algorithms and architectures. This report presents a case study of communications using the SENDa and RECV system software routines on the Finite Element Machine, followed by a discussion of the effect of I/O performance on the efficiency of parallel algorithms

The d-arabitol operon of Klebsiella aerogenes

Imperial Users onl

System software for the finite element machine

The Finite Element Machine is an experimental parallel computer developed at Langley Research Center to investigate the application of concurrent processing to structural engineering analysis. This report describes system-level software which has been developed to facilitate use of the machine by applications researchers. The overall software design is outlined, and several important parallel processing issues are discussed in detail, including processor management, communication, synchronization, and input/output. Based on experience using the system, the hardware architecture and software design are critiqued, and areas for further work are suggested

Probabilistic Aspects Of Brittle Fracture In Pressure-Vessel Steels

This paper addresses issues relating to the treatment of distributions of tensile strength, local cleavage fracture stress, and fracture toughness in pressure-vessel steels and weld deposits. Attention is drawn to the differences in behaviour between steels which have "quasi-homogeneous" microstructures and those which exhibit spatial heterogeneity. The differences are of greatest significance when statistical analysis is applied to distributions to derive "lower-bound" values. The findings from model systems are used to re-assess an earlier analysis of Weibull fracture stress and to comment on the use of a Master Curve methodology in the analysis of the "Euro" fracture toughness data-set

Acoustic and aerodynamic performance investigation of inverted velocity profile coannular plug nozzles, comprehensive data report, volume 2

Volume 2 of a three volume report is presented. Volume 2 presents acoustic data comparisons in graphic form

Microstructural Fracture Criteria in Engineering Allovs

  &nbsp

Acoustic and aerodynamic performance investigation of inverted velocity profile coannular plug nozzles

The results of model scale parametric static and wind tunnel aerodynamic performance tests on unsuppressed coannular plug nozzle configurations with inverted velocity profile are discussed. The nozzle configurations are high-radius-ratio coannular plug nozzles applicable to dual-stream exhaust systems typical of a variable cycle engine for Advanced Supersonic Transport application. In all, seven acoustic models and eight aerodynamic performance models were tested. The nozzle geometric variables included outer stream radius ratio, inner stream to outer stream ratio, and inner stream plug shape. When compared to a conical nozzle at the same specific thrust, the results of the static acoustic tests with the coannular nozzles showed noise reductions of up to 7 PNdB. Extensive data analysis showed that the overall acoustic results can be well correlated using the mixed stream velocity and the mixed stream density. Results also showed that suppression levels are geometry and flow regulation dependent with the outer stream radius ratio, inner stream-to-outer stream velocity ratio and inner stream velocity ratio and inner stream plug shape, as the primary suppression parameters. In addition, high-radius ratio coannular plug nozzles were found to yield shock associated noise level reductions relative to a conical nozzle. The wind tunnel aerodynamic tests showed that static and simulated flight thrust coefficient at typical takeoff conditions are quite good - up to 0.98 at static conditions and 0.974 at a takeoff Mach number of 0.36. At low inner stream flow conditions significant thrust loss was observed. Using an inner stream conical plug resulted in 1% to 2% higher performance levels than nozzle geometries using a bent inner plug

Beating heart coronary surgery and renal function: a prospective randomised study (Presented at 18th Spring Meeting of the Association of Cardiothoracic Anaesthetists: Selected abstracts, Cambridge, UK. 22 June 2001)

Introduction Cardiopulmonary bypass (CPB) is widely regarded as an important contributor to renal failure, a well recognised complication, following coronary artery surgery (CABG). Off-pump coronary surgery (OPCAB) is intuitively considered renoprotective. We examine the extent of renal glomerular and tubular injury in low-risk patients undergoing either OPCAB or on-pump coronary artery bypass (ONCAB).Methods Forty patients awaiting elective CABG were prospectively randomized into those undergoing OPCAB (n = 20) and ONCAB (n = 20). Table 1 illustrates the exclusion criteria. Glomerular and tubular injury were assessed, respectively, by urinary excretion of microalbumin and retinol binding protein (RBP) indexed to urinary creatinine [1]. Daily measurements were made from admission to postoperative day 5. Fluid balance, serum creati-nine and blood urea were also monitored. Results No mortality or renal complication was observed. Both groups had similar demographic make-up. The OPCAB group received fewer coronary grafts than their counterparts (1.8 versus 2.8; P = 0.002). Serum creatinine and blood urea remained normal in both groups throughout the study. A dramatic and similar rise in mean ± 2SD urinary RBP:creatinine ratio occurred in both groups peaking on day 1 (3183 ± 2534 versus 4035 ± 4078; P = 0.43) before returning to baseline levels. These trends were also observed with the urinary microalbumin:creatinine ratio (5.05 ± 2.66 versus 6.77 ± 5.76; P = 0.22). ONCAB patients had a significantly more negative fluid balance on postoperative day 2 (-183 ± 1118 versus 637 ± 847 ml; P < 0.05). Conclusions Although renal dysfunction did not clinically occur in any patient, sensitive indicators revealed significant and similar injury to both renal tubules and glomeruli following either OPCAB or ONCAB. These suggest that avoidance of CPB per se does not offer additional renoprotection to patients at low risk of perioperative renal insult during CABG